How Garage Remodeling Will Fix Your Storage Problems

Garage remodeling is probably the quickest way to add much needed space to your home. If youre considering any sort of home repair this may just be the one that should be first on your list. If youre not using your garage for an area to park your car, then expanding the living space of your home can be quite easily achieved by making this change. As well, youll feel like your home and life are much more organized when you stop storing everything in this area.

If youre thinking of adding a studio, a home office, or a workshop to your home, then of course you need to look no further than the garage. You can even use this area as a home gym, or as an extra living room designated for special events or entertainment purposes. But, dont think that this means that you cannot still store things in this area, or even that you have to sacrifice your parking area. It all really depends on how you go about with your remodeling plans and what your household wants and needs might be.

Since a lot of garages are attached to the house, they can benefit from the exact comfort as the home, which include heating and cooling, phone wiring, as well as plumbing. Youll just need a little imagination, a set budget and a plan.

If you worry that by remodeling your garage, youre losing too much precious storage area, have no fear because you can always build a small storage space behind your garage which can be used to house your tools, sporting equipment, and other items.

Furthermore, when you remodel your garage you should think about adding an addition above your garage. You can add a room for work space and even for living space above the existing garage, which will give you more space as well as increase the your homes value without making major changes to your floor plan.

Do you feel the need to remodel your garage but dont know exactly what you need or want? Then you should consider the following ideas.

How about transforming your garage into a laundry room if youve been performing your laundry duties in the basement. By building a laundry in your garage youll do away with the need to go trounce up and down the stairs a million times a day.

Are you a musician, or just want to be one? A music studio can be a superb choice for your remodeling plans if you or your kids show some talent in this direction. After all, where do you think all of those garage bands got their start? Youll want to consider soundproofing your garage walls so as to avoid your neighbors complaints.

Heres an idea! Change it into a gym. If youve got equipment but you dont have enough space to use it in the house, simply move it into the garage where youll have plenty of space for your daily workouts and. An added benefit is that you wont be bothered by anyone. However you choose to use your new space, hopefully youll enjoy it.

The columnist Leroy Calstard is very excited about issues related to woodworking workbench. His observations on garage workbench can be discovered on http://www.insidewoodworking.com in addition to other websites.

How to Start Saving Money on Energy With a Simple DIY Green Energy Project

The best way of saving money on energy is to start your own DIY green energy project. This will allow you to start using the earth for energy and ultimately save 80% or more on your energy bill every single month. This means hundreds of dollars in savings every single month. What would you do with all of that extra cash? And starting your own DIY green energy project is now easier than ever. Keep on reading because I am going to show you exactly how you can start using the earth for energy and start saving hundreds of dollars every month.

The very first thing that you will need to do is find a reliable DIY green energy guide. The funny thing is that this is actually a lot harder than building a natural power system itself. There are tons of crap products out there so you need to be careful when making a decision. After you have found a reliable guide you will need to pick which type of natural power system you would like to use. The two most popular types of systems are wind turbines and solar panel generators.

The process from this point on should be a breeze because a guide will tell you everything you need to know when it comes to building your own renewable energy source. This means detailed diagrams, schematics, legal information, and even how to get parts for free. You will be saving cash in no time. In fact, you could realistically have your system built in just two days.

Would you be interested if I told you that for less than $50 you could build your own wind turbine or solar panel system in just two days? If so, then just click the link below. You do want to save hundreds of dollars every month by using the earth for energy, right?

Click Here

Get to Know the Green Stuff

Franklin D. Roosevelt once said, "A nation that destroys its soils destroys itself. Forests are the lungs of our land, purifying the air and giving fresh strength to our people." Whether or not you believe the controversial arguments for or against global warming, the fact remains that there is a finite amount of land in our nation and the fundamental issue of sustaining it remains.

Companies continue to expand their efforts in the area of environmental sustainability. However, to be successful, we need the participation of every member of the community in order to implement energy conservation strategies and to maximize our recycling efforts.

How is my Aluminum Can Related to Energy?

Energy costs continue to rise. So, what does the cost of energy have to do with recycling aluminum cans? Consider the following:

• Making new aluminum cans from used cans takes 95 percent less energy than making a new can.
• Tossing away an aluminum can wastes as much energy as pouring out half of that can's volume of gasoline.
• In 2003, 54 billion cans were recycled. This is an energy savings equivalent to 15 million barrels of crude oil - America's entire gas consumption for one day.

Now, consider this. The average American consumes 2.5 beverages a day while at work. Multiply that by the number of employees in the workforce and that's a lot of aluminum... and a great deal of energy! Recycling programs and energy programs, as you can see, are very closely linked.

How Can We Save More Energy?

• Turn off monitors, printers and copiers nightly and on weekends. Do not use screensavers as an alternative to switching off the monitor. Screensavers consume energy. If you plan to leave your computer for more than two hours, switch off your monitor.
• Turn off photocopiers at night if a low standby feature is not available.
• Where possible, replace incandescent lights with compact fluorescent lights (CFLs).Using CFLs instead of comparable incandescent bulbs can save about 50 percent on lighting costs. CFLs use only one-fourth the energy and last up to 10 times longer.
• Switch off all unnecessary lights. Use dimmers, motion sensors, or occupancy sensors to automatically turn off lighting when not in use.
• Where feasible, use natural lighting near windows instead of electrical lighting.
• Close or adjust window blinds to block direct sunlight to reduce cooling needs during warm months. In the winter months, open blinds on south-facing windows during the day to allow sunlight to naturally heat your workspace. At night, close the blinds to reduce heat loss.
• Unplug equipment that drains energy when not in use (cell phone chargers, laptop chargers, fans, coffeemakers, desktop printers, radios, etc.).

How Can I Reduce Waste?

• Use mugs instead of paper or Styrofoam cups for coffee or drinks.
• Consider a two-sided printer the next time you need to buy one.
• Photocopy only what you need. Always use the second side of paper, either by printing on both sides or using the blank side as scrap paper.
• Print email only when necessary.

How Can I Reuse Items to Reduce Waste?

• Set aside paper that is only used on one side so that it can be reused for such things as taking rough notes or phone messages. Paper can be stored in a centrally located storage box, possibly next to printers or photocopiers so that everyone can use it.
• Invest in rechargeable batteries and battery chargers for digital cameras, flashlights, and other small devices.
• Save and reuse packing material.

How Does Recycling Lead to Savings?

Recycle plastic bottles, metal cans, paper, batteries and more at the office, just like you do at home. You do recycle at home, don't you? Let's use paper as an example. Did you know that the average per capita paper use in the U.S. in 2001 was 700 pounds (318 kg) while the average per capita paper use worldwide was 110 pounds (50 kg)? Did you know that in the U.S., 45 percent of paper is recycled? Compare this to 52 per cent in Japan, 67 percent in Germany and 77 percent in the Netherlands. It's time to really think about what we do with paper and other recyclables. Additionally, did you know that many companies receive rebates for recycled materials? Each time you recycle your cans, bottles and paper, you are not only helping the environment by diverting materials from landfill, but you may also be helping the bottom line.

As you can see, there is a long list of actions each person can take to support both your business and the environment. The simple recycling of a can or turning off of a light can go a long way. Remember that the environment, the cost of energy and recycling programs are strongly related.

This author writes on a wide variety of topics both business and non-business related (numerical modeling, environmental aspects, process improvement, business analysis) and runs a consulting business at http://www.numericalinsights.com

Don't Rush When You Install Ceramic Wall Tile in Your Bathroom

It's not that difficult to customize and install ceramic wall tile in your bathroom. A little patience and dedication will get you a long way when installing that dream ceramic tile bathroom wall you've always wanted to have.

Before you begin to install ceramic wall tile, get your tiling tools together. You will need the following tools for this project: A tape measure, a tile cutter and a pair of tile nippers and a pair of pliers, tile spacers, sandpaper, a trowel (preferably notched) and a rubber grout float. To install ceramic wall tile on your bathroom walls properly, you will also need a strong setting material like tiling thinset mortar, or any of a wide selection of tile adhesives. You will also need tiling grout for filling in the gaps between your tiles. Make sure to match your setting material color with your grout.

A bucket, rags and sponges will also be needed for cleaning your tiles of excess grout and other debris, after you're all done. And don't start to install ceramic wall tile without these essentials: You will also need a pair of safety glasses, heavy leather gloves, and long-sleeved work clothes (broken shards, and other debris can cause nasty cuts, if you are not careful). Ready to start on your dream ceramic bathroom wall? Follow the tiling instructions below and make your ceramic tiled bathroom wall and start tiling!

You can begin by finding the center of your wall. Use a carpenter's level, or long pieces of plumb to mark intersecting vertical and horizontal lines. These will be your reference lines for your tiling work. Where both lines intersect is the starting point for your first row of ceramic tiles. From that point, you may then be able to working your way to both ends of your bathroom wall. Make regular checks when you install ceramic wall tile, so that your tiling work is consistent and does run up or down in a slanting direction.

There are two types of bathroom walls you may be working on. One is the common concrete wall, and the other is a special type of called a green drywall. A green drywall is specifically designed for use in bathrooms and showers because it is designed to resist moisture intrusion. Be sure that you clean your walls of dust and debris, as well as repair cracks and fill in gaps and holes. Roughen up or scarify your wall so that your tiling mortar has some grip for bonding. That way, when you begin to install ceramic wall tile on your walls, you won't have a problem with your tiling mortar or bonding material.

You may now start installing ceramic wall tile once the walls are laid out. Start at your reference lines' intersection point. Apply a coat of tiling thinset mortar. Place your tile over it and press the tile down firmly in place. Give it a twisting motion to set it in place. Stop pressing when you feel your tile has set and is no longer wobbly. Duplicate this procedure with the rest of your ceramic tiles. To get a consistent tiling, place tile spacers on all the spaces between your ceramic bathroom tiles. Don't forget to check your work every now and then.

You may not need to use the entire tile as you finish up the end of the row. Use a tile cutter to get your tile under the right size. Then, smoothen the cut edge with sandpaper. Be careful: The edge of a cut ceramic bathroom tile is very sharp. For irregular, use your tile nippers. First draw an outline of the irregular and etch a line along it. Then, use your tile nipper to break off the unuseable edges, until you have required shape. Do this a little at a time, so you can control your tile nipping. Don't forget to sand the edges over.

Once you're done tiling the bathroom wall, leave it to set, overnight, at the very least, or twenty-four hours, at the most. After this setting period, it's time to lay in your grout. There are two main kinds of grout: Sanded or unsanded grout. Sanded grout is a mixture of cement, water and fine sand. Unsanded grout is any of a wide selection of polymer-based and epoxy resin adhesive grout used to install ceramic wall tile. If your tile spaces are more than an eighth of an inch wide, use sanded grout. For smaller tile spaces, use unsanded grout. Start by map out your bathroom wall and work one section at a time. To maximize your grout application, angle your rubber grout float and press down firmly as you spread it over the tile spaces. Check for pockets of air. Dab these spaces with more grout lining by using the edges of your grout float. Use a damp sponge to wipe off any excess grout. Rinse your sponge regularly so you can get a cleaner and better finish. Let your grout dry for a day and then take a dry piece of cloth and clean and buff your tiles.

Before you know it, you're done! Follow these instruction on how install ceramic wall tile, and don't forget that ceramic tiling takes some dedication and patience. Take your time and don't rush your work. When you install ceramic wall tile, the key is consistency and patience. Ceramic tiles that have been rushed will ruin your bathroom's overall look. A bathroom wall with ceramic tiles that run in haphazard inconsistent zigzag lines is not a beautiful thing to look at. And worse, it would only mean that you lack enthusiasm for what you're doing and that you haven't given it your effort.

You don't have to be a master tilist to install ceramic wall tile in your house. All you have is the best ceramic tile installation instructions.

Are Bathroom in Basement Remodels For You?

Are you thinking about expanding your home, but out of space on your main floors? If that's the case, it might be time to do something about your unfinished basement area. A small office, a guest room, a personal gym, or even an entertainment room might do the trick, but if you want to spend time down there, there's something else you'll need. A basement bathroom will keep you from having to run up and down stairs all the time, and it'll also add value to your home. End lines at the bathroom door by performing a bathroom in basement remodel.

There are a few things to keep in mind before you get that renovation started, however. You'll need a project plan with your intended schedule, budget, cost estimates, and work you want done. Keep this updated throughout the process of building your basement bathroom in order to get the best and most predictable results. Start by looking for ideas on your basement bathroom remodel. Home improvement stores, online articles and sites, and magazines are all a good place to start when you decide what you want your finished basement to look like. Think about color, lighting, space set up, and more. The better your plan is, the more likely you are to end up with a bathroom you love.

You'll also need to think about ceiling height, available space, moisture in the basement, basement temperature, and stability of the basement itself. Windows and lighting will be important if you don't want your bathroom in basement remodel to end up like a cave. You'll also have to consider ventilation to keep air moving in the house. An enclosed bathroom with no air movement could end up seeming musty and unpleasant. Remember to decide early on if you want a full or a half bath.

If you're thinking about doing the work yourself, you'll need to know a few things. Most people need basic carpentry and wiring skills to put up walls and get light fixtures working. You'll also have to have a good amount of plumbing experience if you plan on installing the toilet, sink, and tub or shower on your own. However, you don't have to do everything on your own. Calling a professional in for part or all of the work on your bathroom in basement remodel is a smart idea if you're not one yourself.

It may be a good idea to call a professional plumber for the piping, if you don't have the experience and knowledge to do it yourself. In some cases, you may also need to have a pro oversee or sign off on work that you've done yourself. That way, you'll be legal and up to local code. If you know how to frame, wire, and hang drywall (choose moisture resistant board for basements), but aren't sure about plumbing, calling a pro might be the best method you can use. It'll certainly save you some frustration and effort in the long run. Your bathroom in basement remodel can be a real success. All you have to do is have a good plan.

Thomas Johnsen is the Author and Leading Expert on Bathrooms in Basements and the creator of the publication Bathroom in Basement 101. Visit the site now to find the easy-to-understand step-by-step guides on basement bathroom construction available online today.

Build A Home Bar - House Remodeling Ideas

Deciding to build a home bar can be a mixed bag of emotions. At first, you're very excited about your home bar plans because you're going to have this fantastic bar right in your very own home! You'll be throwing awesome parties and entertaining countless friends and family members. Everyone will be talking about how cool your bar is and how they want one in their house too.

However, excitement soon gives way to concern as you realize that you don't have the slightest idea of where to begin to start actually building your bar. You've got no blueprints and no idea what supplies you will need. In addition, you may have little to no construction experience and be afraid that you'll really mess up anything you try to build.

This is the point where most people pick one of three options that almost NEVER yield satisfactory results. They either:

1- Buy a pre-built bar - You've seen these pre-fab bars before. They cost an arm and a leg and they stick out like a sore thumb when you place them in your home. Unless you spend really big money, it's very hard to get one of these that actually looks nice and fits into your home well.

2- Wing It - Ever been to a friend's house and he shows you the "bar" he built, which turns out to be some ugly rectangular structure sticking out of the wall, usually with an old piece of kitchen countertop on it? This happens way too often, and it's the result of people jumping right in and and thinking that they can build a bar without a bit of planning. Every once in a while, this turns out well but, more often than not, it is an absolute failure.

3-Give Up - A lot of people actually stop at this stage. They realize they don't know where to begin and feel like it will be too difficult to figure out how to build a bar of their own. They don't even think about seeking out DIY Bar Plans to learn how to easily build a home bar. People fail to realize that with a good set of home bar plans, almost anyone can build a great looking, high quality bar.

Instead of doing one of these three things, the proper thing to do is to simply do a bit of research into how to build a home bar. You'll quickly find that almost everyone who has had success in building a great bar in their home has started with a great set of bar plans. It gives you the confidence that you can build a great bar and, most importantly, removes all of the guesswork from the process.

If you're serious about building a home bar, don't give up and don't risk failure! Start with a great set of Home Bar Plans to ensure success.

To Install Gutters Or Not to Install Gutters

They divert rain water away from your foundation and landscaping. They protect the ground around your home from erosion. They keep water from pouring on your head as you enter and exit your home. They can be used to collect rain water for watering your lawn and plantings during drought times. Why wouldn't you want to install gutters on your home?

They leak. They clog. They overflow. They rob the plants around your home of a good soaking. They can cause tremendous erosion at the base of downspouts. They're ugly! They require maintenance from a dangerous rooftop or ladder. Why would you want to install gutters on your home?

There is no easy answer to the simple question: "Should I install gutters on my home, or not?" You'll simply have to weigh the pros and cons for your particular situation and decide for yourself.

The first thing to consider in making this decision is do you really need them? Take a look at the ground around your home. Does it slope away from your foundation? If it does you don't need gutters to keep water away from your foundation. If it doesn't you should probably look into some grading work before worrying about gutters anyway.

Next, take a look the landscaping surrounding your home. Can it be damaged by rainwater falling from the edge of your roof? This may be a tough question to answer at first thought. Go outside and inspect the areas under your eaves. If you find bare ground, mulch or lawn you should definitely consider gutters, or a change in ground materials that your rainwater will fall upon. If you find mature shrubbery, stone or any variety of hardscaping you probably don't have to worry about erosion. Consider the height of your roof. Water falling from the edge of a two, or three, story home will cause far more erosion and water falling from a single story home.

Do you have trees around your home? Are they taller than your roof? Will they eventually be taller than your roof? If you have, or someday will have, trees that will shed leaves onto your roof you should seriously consider making do without gutters. Consider installing an alternative to gutters, or invest in one of the better products designed to keep leaves and other debris from entering your gutters. And don't be fooled into thinking that coniferous trees (e.g. pines) don't count. They drop as much, or more, material onto your roof as do deciduous trees.

A clogged gutter or downspout is not only useless, it is dangerous. The overflow is likely to find its way into the fascia board to which the gutter is secured causing rot and possible infiltration into walls and other structural members of your home. Where the collected water hits a clog it overflows, pouring onto a concentrated area of your landscaping or hardscaping causing damaging erosion. Water is heavy. A full gutter can break free damaging your home, or worse.

Do you live in an area that compels you, or forces you, to ration water use? This factor alone can trump all others. Collected rainwater is superior to any other source of water for lawns and other plantings. It can be used to wash your cars or fill pools and other water features. You use it for washing clothes and bathing, even for drinking with proper treatment.

Can you get by with a simple diverter over your entryways allowing water to fall to one side or both? Can you simply deal with a bit of water shedding onto your head during storms? Can you deal with the mundane appearance of traditional gutters and downspouts? Granted, half-round copper gutters and round copper downspouts add elegance to Victorian and Gothic architecture, but standard aluminum "K" gutters and rectangular downspouts can do more to break the clean lines of modern houses than any other exterior accessory items.

Chances are you live in a home that already had gutters installed either for need or as an afterthought of conformity. If you are looking at having a new roof or siding installed think hard on all of these points before making a blind decision to replace your gutters and downspouts as well. If you are building new, consider the site and talk to your neighbors, especially if you are moving to an unfamiliar area. In the end, the decision is yours and yours alone. Make an informed one.

Mike Hudecheck
Pro-G Contractors
Roofing Siding Windows Doors
Delaware, Chester, Montgomery, Philadelphia Counties in Pennsylvania; New Castle County in Delaware; Cecil and Harford Counties in Maryland
http://www.progcontractors.com