If you are looking to install a new shower in your home, the first steps will be to measure, prepare, and fit the shower. A shower kit will always come with installation instructions, which should be followed to get the best result. Here are a few basic, general guidelines that will help as well. As always when tackling any home improvement project, with or without professional help, ensure that all of your permits are in order before you begin. Shower fitting is not recommended for beginner do-it-yourselfers.
The base of any shower is the shower tray. The shower tray holds the water before it drains, keeping it from spilling out on to the floor. Make absolutely certain that the area is level and that the shower tray will be properly supported. Many shower trays are made of acrylic or resin that can be prone to flexing when not adequately supported. Too much flexing can lead to a break in the seal between the tray and the shower enclosure, causing a leak. Avoid this difficult and expensive problem from the start by taking steps to make sure you have the right kind of supports in the right places.
Make sure you have enough room underneath the shower tray for the drainage pipe to run. Measure carefully to ensure you have enough space for this. If you don't, build your shower floor to be a bit higher to allow the correct amount of space for the drainage pipe and waste trap. Make sure you have access to these things as you install the shower tray, so you can check the seals between the drain of your shower tray and your drain pipe before you close it up.
Before installing anything else, make sure that all walls to be included in the showering area have been well water-proofed. You may choose to use tile or a shower kit with plastic wall panels. Which ever route you choose to take, this is a vital step both in beautifying the shower as well as preventing water damage to your home.
The shower screens will be installed last. A good fit is made from accurate measurements! The type and size of the shower screen panels will depend on the size and shape of the shower tray you've purchased. They should fit together without gaps.
The shower screens, whether purchased separately or as part of a kit, will also have instructions from the manufacturer which should be followed for a solid and lasting result. Check all of your caulking and seals to ensure that everything is watertight.
Written by James Chapman, a director of Bella Bathrooms who supply Showers for the UK market.
Bella Bathrooms is an online retailer formed by 2 plumbers from the North East of England. Having hands on experience of custom bathroom installation and products has enabled Bella Bathrooms Ltd to only select quality bathroom products for their online shop. They sell bathroom furniture, bathroom suites, showers and bath related products for consumers through the United Kingdom.
Behind Wood Lath Plater
No comments:
Post a Comment