Tub Faucet Repair Tips

The bathroom is a very important part of your home as it is with the other areas. Here, you get to have warm baths and doing some vanity for yourself. In the bathroom, you will find different bathroom fixtures such as tub and shower faucets. Over time, you might experience damages in your bathroom fixtures and the first thing you can do is to fix such fixtures.

There are many do-it-yourself tips that you can use at home especially for the bathroom. One of which is tub faucet repair. You can fix this by just simple and easy steps. Before anything else, it is just best that you get to know the different things needed in tub faucet repair.

Faucet Designs

Tub faucets have different styles and designs. There are tub faucets that have a single handle that is very convenient as this already controls the temperature and the water flow coming out of the faucet. On the other hand, there is also a double handle type of faucet where in the hot and the cold temperature is done separately using the two handles. To choose which type of faucet you want, it is better that you imagine yourself turning the lever. If you are someone who wants to have two controls for temperature then you better choose to have double lever type faucet handles. There are different designs available for tub faucets nowadays and all you just need to do is to mix and match it with the style of your bathroom. It is recommended that you buy fixtures all from one manufacturer to ensure synchronization of fixture designs.

What Are Washers And Seats?

Washers are usually used in old design types of faucets. Their function is to block water from dripping. A seat on the other hand is when a faucet handle is tightened compressing the washer against it.

Tub Faucet Repair Tips

In repairing a tub faucet, you will notice that there will be drips that you need to address to. With this, you will need to replace the washers and/or seats.

On the other hand, you will need to turn off the water from the main water line so that you can perform your tub faucet repair very well. By doing this, you are sure to fix your tub faucet by removing outer trims without hassle. In removing trims, make sure that you remove carefully the handle/s. The cap is removed thus exposing the screw, which you can take out afterwards. Handle/s should be removed next but should be done very carefully as this may stuck up. You may use pliers to assist you in taking out the needed pieces. After removing the handles, a sleeve or somewhat looks like it should be removed too.

Next, you can now deal with the valve system. You have to hold the handle back for some seconds and then try to half-open the valve. You are sure to take out pressure and thus help you with unscrewing of the pieces. Take note that you have to make sure you are opening the correct piece.

Once you have done this and you have found the washer being broken then you can assume that this may be the cause of the faucet leakage. You are now ready to purchase a new one.

You will also have to check the seats. They are the ones that are being tightened by the washer to ensure stoppage of water flow. You might also need to replace this just to ensure that you will not have to do any reworks.

After replacing such, you are now ready to put back all together the different pieces and after which, you can already use your tub faucet again.

Aikaz Run - Bathroom Advisor

For more information about faucet repair just visit my bathroom designs site.

Tile Roof Stucco Damage